3
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by unauthorized
modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during transportation, misuse,
damage or destruction of the equipment due to adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance with the basic
characteristics set out.
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous parts by hand and
non-waterproof)
• This degree of protection is not indicated on the product and on the technical parameters in
the operating instructions.
• If the protection class of the product is different from IPX0, this information is then displayed
on the label of the appliance or in the technical data of the operating instructions.
• Other characteristics of the domestic operating environment (mechanical stress - vibrations
and vibrations, occurrence of plant, animals, weather effects ...) are negligible in terms of
effect on the correct and safe use of electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make sure that the
voltage on the appliance label corresponds to that of the household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly connected to the
mains.
• Electrical protection class I equipment is equipped with a protection against electric shock
by means of protective earthing of inanimate parts, which can become dangerous when the
device is malfunctioning. Always connect such devices to properly installed mains sockets
that are equipped with earthing conductors and have a properly grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by double insulation or by
enhanced insulation of hazardous live electrical parts. Device of protection class II it must not
be equipped with means to connect protective earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small safe voltage source
(battery or accumulator) and does not present any danger to the user from electrical shock.
• In order to provide increased safety against the risk of electric shock due to the use of
electrical appliances by laypersons, it is recommended to install the power supply circuit
for sockets with a rated current not exceeding 20 A RCD with a rated operating current not
exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a qualified
electrician.
• Only use a power cord with a plug (mains lead) supplied with the device and compatible with
a wall socket. Using another cable may result in fire or electric shock.
