13
Protective system
1.
To avoid injury hot air fan has a built-in protection system that automatically shuts it down
when it is overheated.
1.1 Turn the power switch to position 0, set the thermostat to minimum and unplug the power
cord.
1.2
Check that there is sufficient free space around the fan and that the device is in the
correct position. If so, you can start cooling the device.
1.3
Allow the machine to cool for 8 - 10 minutes before restarting.
1.4
Connect the appliance to the mains and turn on the temperature controller.
Warning:
If the device does not operate normally, turn it off and unplug it. Then take the device to a
service center!
Cleaning and maintenance
1.
Before turning off the device, first set the power/mode switch to position
. After the device
has cooled down (after about 3 - 5 minutes), turn the power/mode switch to position 0.
2.
The fan must be cleaned regularly, at least 2 times a year.
3.
Before cleaning, allow the fan to cool, turn it off and unplug it.
4.
Clean the device with a dry cloth slightly moistened with water. Do not use any abrasive
cleaners or solvents such as alcohol, benzine, or thinner to clean. Do not allow water to enter
inside the unit. Dry the device before commissioning or storing it.
Warning:
When cleaning, never immerse the device in water or any other liquid!
