6
2.Special safety instructions. Read carefully!
• The electrical equipment is designed and manufactured in such a way as to enable safe
operation and use by persons without professional qualifications. Despite all the precautions
that have been taken by the manufacturer for safe use, operation and use carry some
residual risks and associated hazards.
The following symbols and their meanings have been used on the device and in the
accompanying documentation to warn of potential hazards:
This symbol warns users that the device is working with hazardous electrical voltage.
Do not remove the protective covers on the device.
Failure to observe the safety instructions for use and operation of the device poses a
risk of electric shock!
Risk of serious injury or death!
This symbol warns users that there is a risk that if they do not follow the safety
instructions when using or operating the equipment:
Risk of serious injury or death!
Risk of equipment damage or other property damage!
This symbol warns users that there is a risk that if they do not follow the safety
instructions when using or operating the equipment:
Fire hazard!
This symbol used on the product supersedes the sentence: CAUTION! Not to
obstruct.
Transportation/Transfer
• When transporting and carrying, take care when moving to avoid tipping or damaging the
machine.
• Only transport the equipment after thorough inspection of the area and route, which must be
free of obstacles.
• Do not transfer the device until all cable connections have been disconnected. Never carry
the device while it is in operation.
• Carry the device firmly with both hands by the handles or by the bottom edge of the base and
the fixed parts of the covers.
• Make sure your hands and equipment are not damp or slippery when carrying.
There is a risk of serious injury or danger to life!
There is a risk of damage to the equipment!
Unpack/Packaging
• Unpack and dispose of all parts and accessories of packaging materials, labels before
operating the machine. Store all packaging materials in a safe place or keep them out of
reach of children and vulnerable persons.
There is a risk of serious injury!
There is a danger of suffocation!
Inspection/Commissioning
Caution!
• Use only electrothermal heating equipment that is in good technical condition and under the
conditions specified by the applicable legislative requirements, fire safety regulations and this
manual.
• We recommend that you perform both initial and follow-up periodic inspections of the
equipment. Before installation and commissioning, check that the equipment is complete and
shows no visible signs of damage.
• Do not use the device if it is incomplete, damaged, or any part of it has been damaged during
transport or use. In this case, have the unit serviced by a workshop.
• Do not attempt to interfere in any way with the structure or setup of the machine components.
