33 |
P a g e
7.4.4 STUDIO ONE
After opening Studio One, click on ‘Configure Audio Device’. Under ‘Audio Device’, ensure that ‘2.0 -
OPC’ is selected. Depending on what latency you defined in the OPC ‘Latency’ Panel the input
Latency will reflect the Latency in ‘ms’. In the below example the OPC Panel is set to 48, and the
buffer number is ‘4’. Changes to the latency can’t be made from within the program, so you’ll need
to exit Studio One if you wish to change the latency settings. The Control Panel in the below
example doesn’t work when the OPC driver is selected because of this.
