27 |
P a g e
7.4 CONFIGURING SOFTWARE DRIVERS
Your OPC is configured out of the box but over time you may decide to install program updates or
use different audio devices for recording. Here’s a guide for checking that each of the bundles
programs are configured to their correct defaults and how to change them should you wish to use a
different audio device.
7.4.1 AMPLITUBE (STA ND-ALONEAND PLUG-IN)
AmpliTube 3 comes with your OPC as a VST/RTAS plugin and standalone program. The device
settings of AmpliTube is dependent on Mixcraft and Studio One, however as a standalone program
the AmpliTube uses its own device settings. To access the device settings click on Settings>Audio
MIDI Setup. This will bring up the Hardware Settings page. Check the ASIO is selected in the top
drop down list and the Input device is set to ‘ASIO 2.0 - OPC’. The buffer size reflects the OPC panel.
