Oracle X7 series, Руководство администратора

Страница: 96 / 118

Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)
b.
Use the
set
command:
set System/BIOS/Config restore_options=[all|config_only|bootlist_only]
load_uri=
transfer_method://username:password@host/filepath
Where:
■
transfer_method
is one of the following protocols:
tftp
,
ftp
,
sftp
,
scp
,
http
, or
https
.
■
username
and
password
are your credentials on the remote system where the backup
file is saved.
■
host
is the IP address or hostname of the system where the backup file is saved.
■
filepath
is the relative path to the backup file.
Note -
If you transfer the backup file using TFTP, you do not need to provide a
username
or
password
.
Related Information
■
Restore BIOS Configuration, Oracle ILOM Administrator's Guide for Configuration and
Maintenance, Firmware Release 4.0.x at
http://www.oracle.com/goto/ilom/docs
Restore a Saved Oracle ILOM Firmware
Configuration (Oracle ILOM)
Before You Begin
Ensure that you have the privileges associated with the following roles in Oracle ILOM: Admin
(
a
), User Management (
u
), Console (
c
), and Reset and Host Control (
r
).
1.
To restore a saved Oracle ILOM configuration from the Oracle ILOM web
interface:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b.
In the navigation pane, click ILOM Administration → Configuration
Management.
c.
Select Restore in the Operation drop-down list.
96 Oracle X7 Series Servers Administration Guide • September 2017