Oracle X7 series, Руководство администратора

Страница: 65 / 118

Configure DNS Server Information on the SP (Oracle Hardware Management Pack)
For instructions, see “Accessing Oracle ILOM” on page 21 .
b. To enable Oracle ILOM to automatically retrieve DNS information from a
DHCP server on the network, use the
set
command:
set /SP/clients/dns auto_dns=enabled
c. If
auto_dns
is disabled, set one more name servers and search paths:
set /SP/clients/dns nameserver=
ip_address_1
,
ipaddress_2
,
ipaddress_3
searchpath=
domain_1.com
,
domain_2.edu
,
and so on
You can specify up to three IP addresses and up to six search paths.
d.
Set the DNS timeout and retries:
set /SP/clients/dns timeout=
timeoutInSeconds
retries=
retries
Where
timeout
is an integer between 1 and 10, and
retries
is an integer between 0 and 4.
Related Information
■
Modifying Default Connectivity Configuration Properties, Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 4.0.x at
http://www.oracle.
com/goto/ilom/docs
Configure DNS Server Information on the SP
(Oracle Hardware Management Pack)
1. Access the operating system command-line with root privileges.
For more information, see “Accessing the Host Console” on page 38 or “Accessing Oracle
Hardware Management Pack” on page 32 .
2. To enable Oracle ILOM to automatically retrieve DNS information from a DHCP
server on the network, use the following command:
ilomconfig modify dns --autodns enabled --retries
retries
--timeout
timeout
Where
timeout
is an integer between 1 and 10, and
retries
is an integer between 0 and 4.
3.
If you prefer to disable
autodns
, use the following command:
ilomconfig modify dns --nameservers
nameserverlist
--autodns disabled --retries
retries
--
searchpath
searchpathlist
--timeout
timeout
Configuring Oracle ILOM 65