manualshive.com logo in svg

Oracle X7 series, Руководство администратора

Поделиться
Скачать
Oracle X7 series Скачать руководство пользователя страница 95

Restore a Saved BIOS Firmware Configuration (Oracle ILOM)

To back up a configuration to an XML file, see 

“Backing Up Current Firmware and Hardware

Configurations” on page 89

.

■

“Restore a Saved BIOS Firmware Configuration (Oracle ILOM)” on page 95

■

“Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)” on page 96

■

“Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management

Pack)” on page 98

■

“Restore a Saved Oracle ILOM Firmware Configuration (Oracle Hardware Management

Pack)” on page 98

■

“Restore RAID Controller Configuration (Oracle Hardware Management

Pack)” on page 99

Restore a Saved BIOS Firmware Configuration

(Oracle ILOM)

Before You Begin

Ensure that you have Reset and Host Control (

r

) and Admin (

a

) role privileges in Oracle ILOM.

1.

To restore a saved BIOS configuration in the Oracle ILOM web interface, perform

the following steps:

a.   

Log in to the Oracle ILOM web interface.

For instructions, see 

“Accessing Oracle ILOM” on page 21

.

b.   

In the navigation pane, click System Management → BIOS.

c.   

In the Restore section of the page, select a restore option from the Restore

Options drop-down list.

d.   

In the Transfer Method drop down list, select a transfer method.

e.   

Specify the location of the XML file.

f.   

Click Start Restore.

2.

To restore a saved BIOS configuration in the Oracle ILOM command-line

interface (CLI):

a.   

Log in to the Oracle ILOM CLI.

For instruction, see 

“Accessing Oracle ILOM” on page 21

.

Backing Up and Restoring Hardware and Firmware Configurations

95

Содержание X7 series























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды