Oracle X7 series Скачать руководство пользователя

Страница: 110 / 118

Update the BIOS and Service Processor Firmware (Oracle ILOM)

Update the BIOS and Service Processor Firmware

(Oracle ILOM)

Before you begin, ensure that you have Admin (

) role privileges in Oracle ILOM.

Note -

The firmware update process takes several minutes to complete. During this time, do not

perform any operations on the target server.

Obtain the FIRMWARE PACK patch as described in

“Download Firmware and

Software Updates From My Oracle Support” on page 107

The FIRMWARE PACK contains the

.pkg

update file for the BIOS and service processor (SP)

firmware.

To update the BIOS and SP firmware image using the Oracle ILOM web interface,

perform the following steps:

Log in to the Oracle ILOM web interface.

For instructions, see

“Accessing Oracle ILOM” on page 21

In the navigation pane, click ILOM Administration → Maintenance→, and

then click the Firmware Upgrade tab.

Click the Enter Upgrade Mode button.

The Firmware Update page appears.

Select from the following options:

■

Preserve Configuration:

Enable this option to save and restore the existing Oracle

ILOM firmware settings.

■

Preserve BIOS Configuration:

Enable this option to save and restore existing BIOS

configurations. This option is not supported on all servers.

■

Delay BIOS Upgrade:

Postpone the BIOS upgrade until after the next time the system

is reset or power-cycled.

Follow the prompts until the upgrade is complete.

What happens next depends on whether you selected Delay BIOS Upgrade or not:

■

If you did not select Delay BIOS Upgrade, an update status display appears. The

system power cycles and applies the updates when the update status display reaches

100%.

110

Oracle X7 Series Servers Administration Guide • September 2017

Содержание X7 series























































































































Результаты поиска

Содержание X7 series

Отзывы:

Похожие инструкции для X7 series

Бренды по названию

Популярные бренды

Oracle X7 series, Руководство администратора

Результаты поиска

Содержание X7 series

Отзывы:

Похожие инструкции для X7 series

Бренды по названию

Популярные бренды