manualshive.com logo in svg

Oracle X7 series, Руководство администратора

Поделиться
Скачать
Oracle X7 series Скачать руководство пользователя страница 33

Download Oracle Hardware Management Pack Installation Files From My Oracle Support

See the following sections:

■

“Download Oracle Hardware Management Pack Installation Files From My Oracle

Support” on page 33

■

“Install Oracle Hardware Management Pack” on page 33

Download Oracle Hardware Management Pack Installation

Files From My Oracle Support

1.

Verify that the Oracle Hardware Management Pack tools you intend to install are

supported on your server. See 

http://www.oracle.com/goto/ohmp

.

2.

Download Oracle Hardware Management Pack from the My Oracle Support web

site.

For instructions, see 

“Download Firmware and Software Updates From My Oracle

Support” on page 107

.

Install Oracle Hardware Management Pack

Before You Begin

Remove any previous versions of Oracle Hardware Management Pack installed on the server

as described in the 

Oracle Hardware Management Pack Installation Guide

 at 

http://www.

oracle.com/goto/ohmp/docs

.

1.

Ensure that you have access to the Oracle Hardware Management Pack

installation files.

2.

Follow the instructions in the 

Oracle Hardware Management Pack Installation

Guide

 to complete the installation.

Use Oracle Hardware Management Pack

Commands

Before You Begin

■

Oracle Hardware Management Pack must be installed on the server as described in

“Installing Oracle Hardware Management Pack” on page 32

.

■

The operating system must be installed and booted.

1.

Access the host console or a command line with root privileges.

Accessing and Using System Administration Tools

33

Содержание X7 series























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды