Oracle X6 series, Руководство администратора

Страница: 111 / 126

Reset the BIOS Firmware to Default Settings (Oracle ILOM)
Backing Up and Restoring Hardware and Firmware Configurations 111
Alternatively, you can select
Save and Reset
from the Exit menu.
Reset the BIOS Firmware to Default Settings
(Oracle ILOM)
1.
To reset the BIOS firmware to default settings in the Oracle ILOM web interface,
perform the following steps:
a. Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b.
In the navigation pane, click System Management > BIOS.
c. In the Reset to Defaults drop-down list, select Factory.
d.
Click Save.
2. To reset the BIOS firmware to default settings in the Oracle ILOM command-line
interface (CLI), perform the following steps:
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b. Type
set /System/BIOS reset_to_defaults=factory
.
Related Information
■
Reset BIOS Configuration to Factory Defaults, Oracle ILOM Administrator's Guide for
Configuration and Maintenance, Firmware Release 3.2.x at
http://www.oracle.com/
goto/ilom/docs
Reset the BIOS Firmware to Default Settings
(Oracle Hardware Management Pack)
1. Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31 .
2. Type
ubiosconfig reset config
.