manualshive.com logo in svg

Oracle X6 series, Руководство администратора

Поделиться
Скачать
Oracle X6 series Скачать руководство пользователя страница 52

Enabling Persistent Boot Support

52

Oracle X6 Series Servers Administration Guide • April 2016

Enabling Persistent Boot Support

By default, when a boot device is removed and then replaced, that boot device moves to the

last position in the boot order list. The Persistent Boot Support feature enables you to fix the

position of every physical slot, network port, and disk drive bay in the boot order list, regardless

of the presence of a bootable device at each location.

Persistent Boot Support is disabled by default. To enable the Persistent Boot Support feature,

see the following procedure:

■

“Enable Persistent Boot Support (BIOS)” on page 52

Enable Persistent Boot Support (BIOS)

1.

Access the BIOS Setup Utility.

For instructions, see 

“Accessing the BIOS Setup Utility” on page 33

.

2.

Navigate to the Boot menu.

3.

In the Boot menu, select Persistent Boot Support, and then select Enabled.

The boot order list is populated with every physical slot, network port, and disk drive bay in the

server.

4.

Press the F10 function key to save your changes and exit the BIOS Setup Utility.

Configuring BIOS Support for TPM

If you intend to use the Windows Server Trusted Platform Module (TPM) feature set, you must

configure the server BIOS to support this feature.

TPM enables you to administer the TPM security hardware in your server. For additional

information about implementing this feature, refer to the Windows Trusted Platform Module

Management documentation provided by Microsoft.

To enable BIOS support for TPM, see the following procedure:

■

“Configure BIOS Support for TPM (BIOS)” on page 52

Configure BIOS Support for TPM (BIOS)

1.

Access the BIOS Setup Utility.

Содержание X6 series































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды