manualshive.com logo in svg

Oracle X6 series, Руководство администратора

Поделиться
Скачать
Oracle X6 series Скачать руководство пользователя страница 40

Power Control Options

40

Oracle X6 Series Servers Administration Guide • April 2016

Power State

Description

Caution - 

Data loss: To prevent data loss, prepare the operating system for

shutdown before performing an immediate power off.

Note - 

If you updated the system firmware and selected the Delay BIOS Upgrade option,

when you reset or power cycle your server, Oracle ILOM installs the BIOS firmware upgrade.

This causes a reset to take longer than normal and causes the server to power cycle during the

reset. This is normal, expected behavior during a delayed BIOS upgrade. For more details, see

“Update the BIOS and Service Processor Firmware (Oracle ILOM)” on page 118

.

Power Control Options

The server supports the following power control actions.

Power Control Action

Description

Graceful shutdown

Graceful shutdown allows ACPI-enabled operating systems to perform an

orderly shutdown. Servers 

not

 running ACPI-enabled operating systems might

ignore this event and fail to shut down.

Once the shutdown is completed, the green OK status indicator on the front panel

blinks to indicate that the server is in Standby power mode.

Immediate power off

Immediate shutdown abruptly closes all applications and files without saving

changes.

Once the shutdown is completed, the green OK status indicator on the front panel

blinks to indicate that the server is in Standby power mode.

Reset

Reset causes the server to reboot, while power remains applied to system

components (such as disk drives).

Power cycle

Power cycle removes power from all system components, and then reverts the

server to Full power mode.

Power on

Power on causes the server to enter Full power mode.

Powering the Server Off and On

You can power the server on and off locally or remotely. To power off the server locally, you

need access to the recessed power button on the front panel of the server. To power off the

server remotely, you need access to Oracle ILOM.

The following procedures describe how to power the server on and off:

Содержание X6 series































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды