Oracle X6 series, Руководство администратора

Страница: 106 / 126

Restore a Saved BIOS Firmware Configuration (Oracle ILOM)
106 Oracle X6 Series Servers Administration Guide • April 2016
■
“Restore a Saved Oracle ILOM Firmware Configuration (Oracle Hardware Management
Pack)” on page 109
Restore a Saved BIOS Firmware Configuration
(Oracle ILOM)
Before you begin, ensure that you have Reset and Host Control (
r
) and Admin (
a
) role
privileges in Oracle ILOM.
1. To restore a saved BIOS configuration in the Oracle ILOM web interface, perform
the following steps:
a. Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21 .
b. In the navigation pane, click System Management > BIOS.
c. In the Restore section of the page, select a restore option from the Restore
Options drop-down list.
d.
In the Transfer Method drop down list, select a transfer method.
e.
Specify the location of the XML file.
f. Click Start Restore.
2. To restore a saved BIOS configuration in the Oracle ILOM command-line
interface (CLI), perform the following steps:
a. Log in to the Oracle ILOM CLI.
For instruction, see “Accessing Oracle ILOM” on page 21 .
b. Use the
set
command:
set System/BIOS/Config restore_options=[all|config_only|bootlist_only]
load_uri=
transfer_method://username:password@host/filepath
Where:
■
transfer_method
is one of the following protocols:
tftp
,
ftp
,
sftp
,
scp
,
http
, or
https
.
■
username
and
password
are your credentials on the remote system where the backup
file is saved.