Oracle X6 series страница 31 Скачать руководство пользователя

Страница: 31 / 126

Accessing Oracle Hardware Management Pack

Accessing and Using System Administration Tools

set /SP/services/kvms/host_storage_device/ mode=disabled

Related Information

■

Redirecting a Remote Image File,

Oracle ILOM Administrator's Guide for Configuration

and Maintenance, Firmware Release 3.2.x

Accessing Oracle Hardware Management Pack

Before using Oracle Hardware Management Pack, you must install it, and you must install an

operating system. After that, you can run Oracle Hardware Management Pack commands from

the operating system command line, and you can configure and use the management agents.

For installation instructions, see:

■

“Installing Oracle Hardware Management Pack” on page 31

■

Oracle Hardware Management Pack Installation Guide

To get started, see the following procedures:

■

“Use Oracle Hardware Management Pack Commands (Oracle HMP)” on page 32

■

“Use the Oracle Hardware Management Pack Management Agents (Oracle

HMP)” on page 33

Installing Oracle Hardware Management Pack

To install Oracle Hardware Management Pack, you must download the installation files

from My Oracle Support. Then, you can run a graphical installer or install Oracle Hardware

Management Pack components manually.

Review the support matrix to ensure that the Oracle Hardware Management Pack tools you
intend to install are supported on your server:

http://www.oracle.com/technetwork/server-

storage/servermgmt/tech/hardware-management-pack/support-matrix-423358.html

Note -

Beginning with Oracle Solaris 11.2, Oracle Hardware Management Pack (HMP)

has become an integrated component of the Oracle Solaris operating system and is called

Oracle HMP for Oracle Solaris. Do not download and use other versions of Oracle Hardware

Management Pack that are not specifically qualified for the Oracle Solaris 11.2 (and later)

operating system. If you have Oracle Solaris 11.1 or earlier or other operating systems, continue

to use Oracle Hardware Management Pack, available as a separate download from the Oracle

support web site.

Содержание X6 series































































































































Результаты поиска

Содержание X6 series

Отзывы:

Похожие инструкции для X6 series

Бренды по названию

Популярные бренды

Oracle X6 series, Руководство администратора

Результаты поиска

Содержание X6 series

Отзывы:

Похожие инструкции для X6 series

Бренды по названию

Популярные бренды