Oracle X5-2L, Руководство по обслуживанию, Страница: 82 / 324

Unmount an NVMe Storage Drive
82 Oracle Server X5-2L Service Manual • May 2015
Related Information
■
“Storage and Boot Drive Indicators” on page 32
■
“Storage Drives Hot-Plug Conditions” on page 72
■
“Storage Drive Failure and RAID” on page 72
■
“Remove an HDD or SSD Storage Drive” on page 73
■
“Install an HDD or SSD Storage Drive” on page 78
Removing and Replacing an NVMe Storage Drive
Using Oracle Linux
Note -
NVMe storage drives are supported only on servers that are running Oracle Solaris or
Oracle Linux operating systems. Servers that are running Oracle VM, Windows Server, Red
Hat Enterprise Linux, SUSE Linux Enterprise Server, or VMware ESXi do not support NVMe
drives.
The following sections describe how to remove and replace an NVMe storage drive on a server
that is running the Oracle Linux operating system.
■
“Unmount an NVMe Storage Drive” on page 82
■
“Remove an NVMe Storage Drive” on page 84
■
“Verify Removal of an NVMe Storage Drive” on page 84
■
“Install an NVMe Storage Drive in the Server” on page 85
■
“Power On an NVMe Storage Drive and Attach a Device Driver” on page 85
■
“Verify Operation of an NVMe Storage Drive” on page 85
Unmount an NVMe Storage Drive
1. Log in to Oracle Linux that is running on the server.
2. Remove the NVMe storage device path.
a. To find the PCIe addresses (Bus Device Function), type:
#
find /sys/devices |egrep ‘nvme[0-9][0-9]?$’
This commands returns output similar to the following:
/sys/devices/pci0000:80/0000:80:03.0/0000:b0:00.0/0000:b1:04.0/ 0000:b2:00.0 /misc/nvme0
/sys/devices/pci0000:80/0000:80:03.0/0000:b0:00.0/0000:b1:05.0/ 0000:b4:00.0 /misc/nvme1
In the above listing, the PCIe addresses are highlighted in bold text.