E1000 with No Expansion Card:
P o r t 1 P o r t 2 P o r t 3 P o r t 4 P o r t 5 P o r t 6 P o r t 7 P o r t 8
Manual Install
Important Note:
If the Talari configuration for the E1000 does not match the installed hardware
(for example, if the appliance is an E1000-Base
and an interface between 9 and 12 is configured
), the Talari service will be disabled when the package is applied
. A corrected
package will have to be uploaded via Local Change Management (as outlined in steps 4-7 of Deploying the Talari Appliance) to bring
up the Talari service.
Valid ports for each hardware option are
highlighted in green below,
while invalid ports are indicated with a red symbol:
Port 1:
Gigabit Ethernet (Bypass pair with Port 2)
Port 2:
Gigabit Ethernet (Bypass pair with Port 1)
Port 3:
Gigabit Ethernet (Bypass pair with Port 4)
Port 4:
Gigabit Ethernet (Bypass pair with Port 3)
Port 5:
Gigabit Ethernet (non-bypass)
Port 6:
Gigabit Ethernet (non-bypass)
Port 7:
Gigabit Ethernet (non-bypass)
Port 8:
Gigabit Ethernet (non-bypass)
Version 1.1
1 9
Содержание Talari E1000
Страница 24: ...Version 1 1 2 3 ...
