Oracle Talari E100, Руководство по оборудованию

Страница: 13 / 41

1 3
Oracle Talari E100 Hardware Guide
Installing the APN Appliance
Rack Installation
Prior to installing the system in a rack, adhere to the following rack installation
guidelines:

Ensure that there is adequate airflow in the rack. Improper installation
or restricted airflow can damage the equipment.

You should leave at least 1U of vertical space between each system you install in
a rack.

The rack width and depth must allow for proper serviceability and
cable management.

Make sure the rack is properly secured to the floor or ceiling and grounded.

Always load the rack from the bottom up.

Load the heaviest component in the rack first.

Make sure the rack is level and stable before pulling a component out of the rack.

Do not move racks by yourself; at least two people are needed to move a rack
and to safely stage equipment.

Cables should be easily identifiable
.
LAN/WAN Connections
When connecting each Ethernet cable (LAN, WAN) to the appropriate connector on the
E100 APNA:

Position the cables carefully, so that they do not put strain on the connectors.

Organize cables in bundles such that cables do not intertwine.

Inspect the cables to make sure that the routing and bend radii are
satisfactory. Reposition cables, if necessary.

Install cable ties in accordance with site requirements.
Connecting Power to the Appliance
When connecting power to the E100 APNA:

Make sure the system is powered off using the power button on the rear of the
appliance.

Plug the AC power cord into the appliance.

Plug the AC power cord into an uninterrupted AC power source.