Oracle SUN X4-8 страница 27 Скачать руководство пользователя

Страница: 27 / 154

Oracle Hardware Management Pack

■

Viewing and editing hardware configurations for the SP

■

Monitoring vital system information and viewing logged events

■

Managing Oracle ILOM user accounts

You can access the server SP in either of the following ways:

■

“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 55

■

“Log In to Oracle ILOM Using a Local Serial Connection” on page 55

Oracle Hardware Management Pack

Oracle Hardware Management Pack (HMP) provides a family of command-line interface (CLI)

tools for managing your servers, and an SNMP monitoring agent.

■

You can use the Oracle Server CLI tools to configure Oracle servers. The CLI tools work

with Oracle Solaris, Oracle Linux, Oracle VM, other variants of Linux, and Windows

operating systems. They can be scripted to support multiple servers, as long as the servers

are of the same type.

■

With the Hardware Management Agent SNMP Plugins, you can use SNMP to monitor

Oracle servers and server modules from the operating system using a single host IP address.

This prevents you from having to connect to two management points (Oracle ILOM and the

host).
The Hardware Management Agent fetches and pushes information to and from Oracle

ILOM. The SNMP Plugins provides an industry-standard SNMP user interface.

■

Use Oracle Linux Fault Management Architecture (FMA) host-based command-line

interface to view and act on faults from the host operating system using fault management

commands similar to those available from the Oracle ILOM Fault Management shell. The

Oracle Linux FMA software is available starting with Oracle HMP 2.3 and supported for

the Sun Server X4-8 running Oracle Linux 6.5 or later with system software 1.1.0 or later.

For more details on Oracle Hardware Management Pack, refer to:

http://www.oracle.com/goto/OHMP/docs

UEFI BIOS

The Sun Server X4-8 is equipped with Unified Extensible Firmware Interface-compatible BIOS

(UEFI BIOS), which avoids many of the limitations of legacy BIOS. However some operating

Managing Your Server

Содержание SUN X4-8



























































































































































Результаты поиска

Содержание SUN X4-8

Отзывы:

Похожие инструкции для SUN X4-8

Бренды по названию

Популярные бренды

Oracle SUN X4-8, Руководство по установке

Результаты поиска

Содержание SUN X4-8

Отзывы:

Похожие инструкции для SUN X4-8

Бренды по названию

Популярные бренды