manualshive.com logo in svg

Oracle SPARC T7-2, Руководство по установке

Поделиться
Скачать
Oracle SPARC T7-2 Скачать руководство пользователя страница 34

Install the Server

3.

Insert the mounting brackets into the slide rails, and then push the server

into the rack until the mounting brackets encounter the slide rail stops

(approximately 12 inches, or 30 cm).

Caution - 

When inserting the server into the slide rail, ensure that both the top and bottom

mounting lips of the mounting brackets are inserted into the slide rail. The server should slide

forward and backward easily if correctly installed. If the unit does not slide easily, ensure that

each mounting lip is inserted properly. If the mounting brackets are not inserted properly, the

unit might fall when it is removed from the rack.

4.

Simultaneously push and hold the green slide rail release buttons on each

mounting bracket while you push the server into the rack.

Continue pushing until the slide rail locks (on the front of the mounting brackets) engage the

slide rail assemblies. You will hear an audible click.

Caution - 

Verify that the server is securely mounted in the rack and that the slide rail locks are

engaged with the mounting brackets before continuing.

Related Information

■

“Disassemble Slide Rails” on page 27

■

“Install the Rackmount Hardware” on page 28

34

SPARC T7-2 Server Installation Guide • March 2016

Содержание SPARC T7-2















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды