manualshive.com logo in svg

Oracle SPARC T7-2, Руководство по установке

Поделиться
Скачать
Oracle SPARC T7-2 Скачать руководство пользователя страница 33

Install the Server

Install the Server

Use this procedure to install the server chassis, with mounting brackets, into the slide rail

assemblies that are mounted to the rack.

Caution - 

This procedure requires a minimum of two people because of the weight of the

server. Attempting this procedure alone could result in equipment damage or personal injury.

Caution - 

Always load equipment into a rack from the bottom up so that the rack will not

become top-heavy and tip over. Extend the rack's anti-tip bar or anti-tilt legs to prevent the rack

from tipping during equipment installation. See 

“Stabilize the Rack” on page 26

 for more

information.

1.

Push the slide rails into the slide rail assemblies in the rack as far as possible.

2.

Raise the server so that the rear ends of the mounting brackets are aligned with

the slide rail assemblies that are mounted in the rack.

Installing the Server

33

Содержание SPARC T7-2















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды