Oracle DE2-24 Скачать руководство пользователя страница 67

Страница: 67 / 312

How to Replace a ZS4-4 Memory Riser Card

Shut down the controller using one of the power-off methods described in

“How

to Power off the Controller” on page 41

Extend the controller from the rack as described in

“How to Extend the Storage

Controller from the Rack” on page 41

Remove the top cover as described in

“How to Remove the Top

Cover” on page 42

To remove the memory riser card, pull the handles upward to disengage the

connector from the motherboard, and carefully lift the memory riser straight

up and out of the controller. The handles act as levers against the sidewalls to

extract the card connector from the connector on the motherboard.

On the replacement memory riser card, ensure that all populated and

unpopulated DIMM slot ejector levers are in the closed and locked position.

Caution -

Open DIMM ejector levers can break off during the installation of the memory riser

card. All populated and unpopulated DIMM slot ejector levers on the memory riser card must

be in the fully closed and locked position before installing the card in the controller.

In the controller, ensure that the memory riser card ejector levers are in the

closed position.

Note -

The ejector levers are only used to remove a memory riser card and are not used to

install a card.

Position the memory riser card over the slot on the motherboard.

The DIMMs on the card must face to the left (when positioned at the front of the controller).

Servicing the Hardware

Содержание DE2-24

























































































































































































































































































































Результаты поиска

Содержание DE2-24

Отзывы:

Бренды по названию

Популярные бренды

Oracle DE2-24, Руководство по обслуживанию клиентов

Результаты поиска

Содержание DE2-24

Отзывы:

Бренды по названию

Популярные бренды