manualshive.com logo in svg

Oracle DE2-24, Руководство по обслуживанию клиентов

Поделиться
Скачать
Oracle DE2-24 Скачать руководство пользователя страница 250

How to Replace a Faulty Disk Shelf Drive

Use the following procedure to replace a faulty drive. The disk shelf drives are hot-swappable

and may be replaced without removing power from the disk shelf. The replacement drive must

be of the same capacity and type as the drive to be replaced. To avoid possible data loss when

removing non-faulted drives, label each drive with the number of the slot from which it was

removed and reinstall each drive into the same slot.

Note - 

Do not perform a pool configuration operation while a disk firmware upgrade is

occurring. To check if an upgrade is in progress, navigate to Maintenance > System in the BUI,

or 

maintenance system updates

 in the CLI.

1.

Faulted drives are indicated by an amber LED. Go to the Maintenance >
Hardware section of the BUI, click the right-arrow icon   at the beginning of the
appropriate disk shelf row, and click the information icon   for the appropriate
drive to view details, or click the locator icon 

 to turn on the locator LED. To

add, not replace, a new cache device into an appropriate and empty drive slot,

see 

“How to Add a Disk Shelf Cache Device” on page 264

.

2.

Locate the failed disk drive with an amber LED at the front of the chassis.

3.

Press the release button or latch to release the drive lever.

4.

Pull the drive lever fully open to unlock and partially eject the drive from the

chassis.

250

Oracle ZFS Storage Appliance Customer Service Manual • February 2016

Содержание DE2-24

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды