Opus Sideris, Руководство пользователя

Страница: 32 / 47

Sideris Printer
Instrukcja obsługi / User guide
32
Tinsel printing on the channel
• Press the work table lock button (3), the indicator light (4) flashes red.
• Slide the work table (6) out of the equipment.
• Insert 2 channel jigs of the right size for the channel, (15) in the recesses (B) of the work table,
depending on the length of the channel to be tinsel printed, recesses 1 and 2 or 1 and 3 should
be used. The jig should be selected according to the size of the channel.
• Place the channels on the jigs.
• Place the frame (17) with the tinsel/colored foil on the two locating pins (A) .
The frame has 4 holes for the locating pins (A) on the corners. The frame can be turned round
completely for the next tinsel printing.
•Slide the work table into the device so that part of the channel is under the rinse tinsel print-
ing head.
•Press the work table lock button (3). The device will move to the ready to tinsel print work
position.
•Press the "Send" button for the Silhouette Studio - the equipment starts to tinsel print.
•You can stop the tinsel printing at any time with the pause button (5). The LED (4) flashes
green. Pressing the button (5) again and it will resume the tinsel printing operation.