Optoma ZU500TST, Руководство пользователя

Страница: 37 / 51

English 37
USER CONTROLS
Remote Setting
IR function: When this function is “Off”, the projector cannot be operated by the remote control.
y
Remote code: 00~99, default code (common code): 00
y
Note:
How to set remote controller to the remote code.
1. Press remote controller “ID” Key for 5 secs
2. Press remote controller the number button (XX)
For example, if user would like to set remote controller to map remote code setting value 2, press ID Key for
5 seconds and then press 02.
HDBaseT Control
The projector will automatically detect the signal from HDBaseT transmitter supplied. Choose “HDBaseT” to
activate Direct Power mode.
PIP-PBP Module
Version: Show PIP-PBP module software version. •
Reset: Reset the PIP-PBP module. •
USB Upgrade: Upgrade the PIP-PBP module software. •
HDMI EQ: Set PIP-PBP module HDMI port EQ value. •
Information Hide
On: Choose “On” to hide the info message. •
Off: Choose “Off” to show the “info” message. •
Information
Display the projector information for model name, SNID, source, resolution, software version, aspect ratio, SSI
Hours, IP Address and Network Status on the screen.