Optoma ZU500TST, Руководство пользователя

Страница: 35 / 51

English 35
USER CONTROLS
Options
Logo
Use this function to set the desired startup screen. If changes are made they will take effect the next time the
projector is powered on.
Default: The default startup screen. •
User: Use stored picture from “Logo Capture” function. •
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Note:
“Logo Capture” is not available when 3D is enabled.
Before active this function, it is recommended that “Aspect Ratio” is set to the “Auto”.
Auto Source
On: The projector will search for other signals if the current input signal is lost. •
Off: The projector will only search current input connection. •
Input
Press ► button to enable/disable input sources. The projector will not search for inputs that are not selected.
Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Sleep Timer
Sets the countdown timer. The countdown timer will start, with or without a signal being sent to the projector. The
projector will automatically power off when the countdown has finished (in minutes).
SSI Settings
SSI Hours Used (Normal) •
Display the projection time of normal mode.
SSI Hours Used (ECO)
•
Display the projection time of ECO mode.
SSI Power Mode
•
Normal: Normal mode.
ECO: Use this function to dim the projector SSI which will lower power consumption and extend the SSI life.
High Altitude
On: The built-in fans run at high speed. Select this option when using the projector at altitudes above 2500 •
feet/762 meters or higher.
Off: The built-in fans automatically run at a variable speed according to the internal temperature.
•