Rev. 00
Company Confidential Optoma_______________________ Delta____________
74
2008/07/02
10-1-3. Cleaning the Color Wheel Assy
1. The color filter is made of thin glass. Be very careful when handing the filter.
2. In case of fingerprints, etc. on the surface, clean in the same way as the projection
lens unit as described in item 10-1-1. Do not use detergents as this could cause
peeling of the color filter.
10-1-4. Cleaning the DMD
1. The DMD surface is glass and can be cleaned. However, avoid scratches as these can
have a direct influence on the image.
2. In case of dust on the DMD surface use an air cleaner (with a device to prevent static,
if possible) to clean off the surface.
3. In case of fingerprints, etc., add a small amount of water to the designated glass
cleaner and wipe off in one direction. Then use the designated dry glass cleaner to
wipe off in the same direction.
4. Do not use absolute alcohol or other substances that could leave streaks after drying.
10-1-5. Cleaning the Reflecting Mirror
1. Be careful not to touch the reflecting mirror. The surface is composed of vapor
deposition silver and touching it directly with the hands can lead to burnishing.
2. Do not clean other than with air.
Содержание EW674
Страница 11: ...Rev 00 Company Confidential Optoma_______________________ Delta____________ 11 2008 07 02 ...
Страница 13: ...Rev 00 Company Confidential Optoma_______________________ Delta____________ 13 2008 07 02 2 6 Block Diagram ...
Страница 80: ...Rev 00 Company Confidential Optoma_______________________ Delta____________ 80 2008 07 02 ...
Страница 81: ...Rev 00 Company Confidential Optoma_______________________ Delta____________ 81 2008 07 02 10 6 Carton ...