Optoma EW674, Руководство по обслуживанию

Страница: 70 / 81

Rev. 00
Company Confidential Optoma_______________________ Delta____________
70
2008/07/02
9. Projection Lamp
9-1. Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a
certified replacement part, which you can order from your local dealer.
Important:
1.
The lamp contains a certain amount of mercury and should be disposed according to local
ordinance regulations.
2.
Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure
to do so could result in a severe burn.
1. Loosen the two captive screws on the lamp compartment cover.
2. Open the lamp compartment cover.
3. Remove the two screws from the lamp module.
4. Lift the module handle up.
5. Replace the lamp module.
6. Reverse steps 1 to 5 to install the new lamp module.