Optoma EW674, Руководство по обслуживанию

Страница: 39 / 81

Rev. 00
Company Confidential Optoma_______________________ Delta____________
39
2008/07/02
Step 2:
Following is the screen capture when there is no projector connected.
Step 3: Make sure the USB cable is firmly attached between projector and computer; the power switch is in
ON position (if the projector got hardware power switch) and projector is in STAND BY mode.
Press
< Down >, < Up >, < Right >, < Up >
key in sequence on keypad (DP2601/2618/3618 series) or IR remote
controller (DP3602 series)
。
The power and lamp LED will blink and the Flash-Tool mode will be enabled.
.
Step 4:
Press “Choose” button to locate the new firmware which can be downloaded from websit
e (for example: DP3635-JAXX-DPD0A.img). Select the candidate .img file and either double click it or press the
“Open” button to load the file.
Press “Choose” to select file
Projector information
Note:
The Windows hardware wizard will pop up if the USB device driver is not installed. Just select
the recommended options and let Windows Wizard do it automatically…