Optoma 5 Series, Руководство пользователя

Страница: 28 / 111

English 28
SETUP AND INSTALLATION
Touch pen holder connection
To install a holder for the touch pen, complete the following steps:
1. Attach the magnetic touch pen holder to the rear side of the screen.
1. Connect the USB cable of the touch pen holder to an available USB port on the IFP.
Note: If the touch pen holder is plugged into the USB 2.0 port then the pen holder trigger function can
be used for multiple sources. If the touch pen holder is plugged into the USB3.0 port then it can
be used only with Android source.
3.0
3.0
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
TO
UCH 2
TO
UCH 1
3.1
2. Insert the touch pen to its holder.
3.0
3.0
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
TOUCH 2
TOUCH 1
3.1
Note: If the IFP screen is on the Home screen, then removing the touch pen from its holder launches by default
the Creative Board . To customize the pen holder trigger action, refer to the setup instructions for this
feature (page 44) under the Configuring Device Settings section.