English
50
BASIC OPERATIONS
-
OTA (Over-The-Air) Software Upgrade
to enable or disable upgrading software over Internet. Tap
Auto
to enable the system to check for firmware upgrades automatically every time the IFP is powered on and
connected to the Internet. If the
Auto
option is disabled, the system will not check for firmware upgrades
automatically. To check for updates manually, tap
Update
.
Note:
Upgrading software over Internet requires a network connection.
-
USB Software Upgrade
to upgrade software from a USB flash disk.
Note:
To proceed with upgrading software, save the upgrade file to the USB flash disk first, then connect
the disk to an available USB port on the IFP. Open
Advanced Settings > System > Update > USB
Software Upgrade
and tap
Start
at the prompt.
Note:
If you upgrade IFP’s firmware from a USB storage, uncompress the upgrade file first and then copy the
uncompressed file to the USB root directory. Make sure the USB flash disk is formatted as FAT32.
IMPORTANTT!
During the update process, either OTA or from a USB storage, DO NOT power off the IFP and
DO NOT remove the USB dongle from the IFP. Doing so will damage the system.
Содержание 5 1RK Series
