English 49
BASIC OPERATIONS
d) Check the checkbox next to the new schedule in
Advanced Settings > System > Startup and Shutdown
menu to activate the schedule.
Tap
Power
to configure power settings. Tap any of the following:
-
Signal Power On
to enable or disable starting up the IFP when an input signal is detected.
Note:
Signal power on can’t work and will be gray out when Power Mode (Standby) is set to
Active
.
-
Direct Power On
to enable or disable starting up the IFP from the power source.
Note:
Direct power on feature aids installations that rely on power-on timers.
- ◄► on
Auto Power Off (min.)
item to select one of the available time intervals in minutes to automatically
power off the IFP when there is no input source found: Off (function is disabled), 5, 10, 15, 20, 25, 30, 35, 40,
45, 50, 55, or 60.
-
Wake on LAN
to enable or disable remotely starting up the IFP over LAN.
Note:
Wake on LAN can’t work and will be gray out when Power Mode (Standby) is set to
Active
.
Tap
HDMI CEC
to enable or disable any of the available options: Display on then player on, Display off then
player off, Player on then display on, or Player off then display off.
Tap ◄► on
Power Mode (Standby)
item to select one of the available options: Eco or Active. By default,
Active
item is not visible. To enable
Active
option, do the following:
a) Press
Input
+
5
+
9
+
8
+
0
buttons on the remote control. The
DEBUG MENU
opens.
b) Tap
HIDE
next to
Active Standby
. Select
SHOW
at the prompt.
c) Tap
Exit
to exit the
DEBUG MENU
.
Active
option is visible in
Advanced Settings > System > Power Mode (Standby)
menu.
Note:
Optoma ProService
and LAN control remote power on functions will only work when Power Mode
(Standby) is set to
Active
.
Note:
Active Standby mode consumes higher power since system only turns off backlight and mainboard is still
working to listen for power on command from LAN and
Optoma ProService
. If you don’t have remote
power on requirement, we suggest using
Eco.
Standby mode to save more power.
Note:
It is also highly recommended that you switch back to
Eco.
Standby mode and turn off the IFP for a period
of time. It will help IFP system to release memory and CPU loading.
Tap
Update
to configure upgrading options. Tap any of the following:
Содержание 5 1RK Series
