11
20
MODES
* LOCKOUTS *
You may lockout up to 1000 individual frequencies as they are received in sweep mode. Frequencies may also be locked out in VFO mode.
1.
Press the MODE/POWER button until *CONFIG* is displayed.
2.
Press the UP/DOWN arrow buttons until LOCKOUTS is displayed.
3.
Press and hold the FNCTN button and press the UP/DOWN arrow button to turn lockouts ON/OFF.
(To lockout frequencies in
sweep or VFO mode lockouts must be ON).
4.
Press the MODE/POWER button until *SWEEP* is displayed.
5.
To lockout a frequency that is currently displayed press and hold SHIFT button and press the SKIP/LOCKOUT button.
6.
To lockout a frequency in VFO mode press the MODE/POWER button until *VFO* is displayed. Enter the desired frequency
according to the instructions given in the VFO section of this manual. Press and hold the SHIFT button and press the SKIP/LOCK
OUT button.
7.
To view the frequencies that have been locked out press the MODE/POWER button until *LOCKOUTS* is displayed.
8.
Press the UP/DOWN arrow buttons to view frequencies currently in the lockout memory.
9.
Individual frequencies may unlocked. Those frequencies with an * beside MHz are locked out. To unlock a specific frequency
press and hold the FNCTN button and press either the UP/DOWN arrow buttons. The * will no longer be displayed. To lock
out a frequency again after it has been unlocked simply repeat this step so that the * is once again displayed next to the frequency.
10.
To clear all lockouts currently in memory press the MODE/POWER button until *CONFIG* is displayed. Press the UP/DOWN
arrow buttons until Clear Lockouts is displayed.
11.
Press and hold the FNCTN button and press the UP arrow button to clear all frequencies from the lockout memory.
