28
Chapter 5. Usage and Adjustment
A16.1098
Figure 30
5.2 Adjust light intensity and switch up
and down lights
（
Figure 28
）
①
Press the TL key as shown in the figure
to confirm that the upper light is on.
②
Turn the brightness adjustment hand
wheel left and right to make the
brightness
reach
the
appropriate
brightness.
5.3 Light path switching
（
Figure 29
）
①
Turn the upper lever to the right
position
②
Move the down lever to the left or
middle position.
5.4
Specimen placement and platform
adjustment
（
Figure 30
、
Figure 31
）
①
Adjust the gap width of the slide to
match the specimen, and then put the
specimen in
★
knurled screws can be used to fix the
clearance position of one side sliding
plate.
★
install the attached stage clamp to the
slide gap and fix the specimen with the
stage clamp
Brightness adjustment
handwheel
Up light
switch
Figure 28
Figure 29
Up lever
Down lever
Gap of
slide
Adjust the
width to
match the
sample
Glass slides,
Petri dishes, etc
Knurled
screw
