13
Chapter 3.Installation
A16.1098
Figure 4
★
Under the situation of
selecting centering telescopes.
3.3 Eyepieces with cross hair
（
Figure 4
）
If adding division onto
eyepieces,the image
may slightly shift.
You can rotate the adjustment
ring to make eyepiece division
focused.
Just screw down the ruler
to change the division.
3.4 Transmission light stand
（
Figure5
）
Place the stand on the back of
the main body,and fix it with
screw M5X35 and spring
washer.
★
Don
’
t need to debug it.
3.5 Objectives
（
Figure6
）
Screw off the nosepiece dust
cover and turn the objective lens
into threaded hole of
nosepiece,fully exposed to the
end face.
The objective is matched with
nosepiece in the order of
multiplier.
Turn the dust cover into other
empty space.
mounts
eyepiece ametropic
correction ring
reticle
zero index
(white one)
zero
transmitted light carrier
hexgon scoket
screw
dust cap
objective
Figure 5
Figure 6
