OPTO 22 SNAP-PAC-R1, Руководство пользователя

Страница: 16 / 96

INSTALLING HARDWARE
SNAP PAC R-Series Controller User’s Guide
8
NOTE: If you run PAC Project applications in Microsoft Windows XP, make sure you have Service
Pack 3 installed. Otherwise, a Microsoft bug may cause the system to crash. See
OptoKB article
#KB49838 for details.
Installing Hardware
Assemble the rack and power supply according to the directions that came with them. For
help with wiring, see the product data sheets, which are available on our website at
www.opto22.com.
Installing Modules on the Rack
CAUTION: Make sure you are using a SNAP PAC rack for your SNAP PAC R-series controller. Using
the wrong rack will severely damage the controller.
Modules snap into any position in the row of connectors on the SNAP PAC rack. Each
module connector has a number.
NOTE: R-series controllers with serial numbers lower than 600,000 are limited to eight 4-channel
digital modules per rack, located in the first eight positions.
1.
Place the rack so that the module connector numbers are right-side up, with zero on
the left.
2.
Position the module over the module connector, aligning the small slot at the base of
the module with the retention bar on the rack.
Controller
connector
Module
position zero
Controller connector
Module connectors