OPTO 22 SNAP-PAC-R1, Руководство пользователя

Страница: 15 / 96

SNAP PAC R-Series Controller User’s Guide
7
7
Chapter 2
2: Installation
If you already know how you will use the SNAP PAC R-series controller and want to get it
running quickly, follow the sections in this chapter.
To learn about communication options and networking, start on page 17 . Specifications are
listed on page 35 .
What You Will Need
You’ll need the following items to install a SNAP PAC R-series controller:
• PC running Microsoft
®
Windows
®
2000 or higher, with a 10/100 MB Ethernet adapter
card, the TCP/IP protocol installed, and a valid IP address, on the same subnet as the
controller. (For more information, see
“Networking” on page 27 .)
• Crossover cable (for direct connection to the PC), or an available connection to a
standard 10BASE-T or 100BASE-TX Ethernet network. (NOTE: Wired+wireless models
must be configured on a wired network before being used on a wireless network.)
• SNAP PAC R-series controller
• SNAP PAC mounting rack and SNAP I/O modules. Choose rack and modules based on
your needs.
• A SNAP-PS5 or SNAP-PS5U power supply or other 5 VDC power supply (5.0 to 5.2 VDC
at 4.0 A) applied to the rack. Additional power may be required for SNAP I/O modules
and depends on the number and type of modules used. For more information, see
“Determining Power Requirements” on page 80 .
Installing Software
In your CD-ROM drive, insert the CD that came with the controller. The installation wizard
should start automatically. If it doesn’t, use Windows Explorer to navigate to your CD-ROM
drive and then double-click setup.exe. Follow directions to install the software.