IRSPD 22X IR SPEED DOME
5
Product appearance
2. Installation
Before the dome is installed, the communication protocol, baud rate and dome address,
should be confirmed. Set the code switch, keeping the setting consistent with the control
system. The relative code switch site and connecting check follows manual.
Attention:
When use 1 general line to control two or more speed dome cameras, connect the
two speed dome camera on RS 485 ends joint with 1200ohm resistance. The match
resistance had design on the dial switch; you only n
eed to dial “ON”. (Check 4.5 sections)
3. Technology Specification
Camera housing, inside camera & bracket: Aluminium
Dimension: see follow picture
Weight:
Net weight Packing weight
Camera housing 3.6kg
6.4kg
Inside camera 0.8kg 1.2kg
Temperature
：－
40ºC
～
＋
65ºC
Device structure
Horizontal turn 360º continuous roll
Vertical turn +2º~-92º
Manual control Pan Tilt speed
Horizontal
：
0.1º
－
65º/s manual operation
Vertical
：
0.1º
－
65º/s manual operation
Preset speed
：
Horizontal
：
280º/s
Vertical
：
180º/s
Electric Index
Input voltage
：
AC 90V
～
260V
Input Power
：
≦
25VA
Camera parameter
Signal System: PAL / NTSC
Scanning System
：
separate row/ one by one line scanning
CCD
：
1/4"CCD
Effective Pixels
：
752(H)x582(v)
