IRSPD 22X IR SPEED DOME
21
19.4 UP TO TOP MENU
20. LOCATION INDICATIR
This menu for check if display camera's pan angel and tilt angel, press "Iris Close" key
and display the menu as follow:
■PAN POSITION:ON
TILT POSITION:ON
UP TO TOP MENU
20.1 PAN POSITION
ON: display pan angel
OFF: un-display
20.2 TILT POSITION
ON: display tilt angel
OFF: un-display
20.3 UP TO TOP MENU
21. BASIC SETUP DISPLAY
Display system information, included address, protocol, baud rate, system and firmware
version etc. Press "Iris Close" and display follow interface:
SPEED DOME SETUP
■PELCO--D ADDRESS:001
■PELCO--P ADDRESS:002
■PROTOCOL: PELCO D/P
■BAUD RATE:9600.N.8.1
■CAMERA TYPE: PAL
■FIRMWARE VERSION:2.10
RETURN TO MAIN MENU
Press "Iris Close" and return to main menu.
Exception Handling
Malfunction
Cause
Resolution
No picture
(1) Power fault
(2)Video
signal
not
(1) Check-up the voltage of the power input and
polarities.
