IRSPD 22X IR SPEED DOME
9
5. Speed Dome Camera Address Setting
Each PTZ camera must be assigned with a unique Camera address. The camera
addressing scheme is using binary system. For your convenience, you can follow
the chart to set an address to your camera.
6. Self-test process
“WELCOME TO USE……” will display on the screen as following when power on.
WELCOME TO
USE……!
Then the system enters into the self-test. During the self-test, the current setup information
will display as followed.
SPEED DOME SETUP
■PELCO--D
ADDRESS:001
■PELCO--P
ADDRESS:002
■PROTOCOL: PELCO
D/P
■BAUD RATE:9600.N.8.1
■CAMERA TYPE: PAL
■FIRMWARE
VERSION:2.10
CONFIGURE DONE
After self checking, the system's information disappeared automatically, if you want to
exam the system information at any time, you can enter OSD (ON SCREEN DISPLAY) menu,
select” "BASIC SETUP DISPLAY" item then display system configure information.
After the self-test, pan and tilt coordinates will display at the right corner of the screen during
the normal work mode.
156□32
For example, current coordinate is 156°for pan and 32°for tilt.
