16. Inevitably the air intake grille becomes hot when using the appli-
ance. Make sure the cord does not come into contact with the air
intake grille when using the appliance.
17. The air intake and outgoing openings must never be blocked.
However should the air ventilation get blocked, the safety device
will stop the appliance immediately. The latter will restart when it
has cooled down. You will have to wait a couple of minutes.
18. The safety grille in the air intake opening prevents the hairs from
being sucked in. If you notice after some time that the grille gets
blocked by dust, you have to clean it. If you don’t clean it, the air flux
will progressively decrease and the appliance might get damaged.
19. Make sure the hair does not come into direct contact with the air
intake opening.
(*) Competent qualified electrician: after sales department of the pro-
ducer or importer or any person who is qualified, approved and compe-
tent to perform this kind of repairs in order to avoid all danger. In any
case you should return the appliance to this electrician.
This appliance must never be used near water (e.g. a
filled wash basin, bathtub or shower).
Do not allow the appliance to get wet.
SPECIAL ATTENTION
Your new appliance is designed with a protective coating around the
heating coils. When plugged in and operating for the first time, there
may be a little momentary smoking while this coating is initially heated.
This presents no danger to the user and does not indicate a defect in
the unit. When using for the first time, allow the appliance to continue
running until the smoke dissipates. This should last only about
30 seconds.
HOW TO USE YOUR HAIR DRYER
Speed settins
Cool shot (SW-6122)
0 = OFF
* = cool
1 = normal
2 = fast
To select the desired speed setting or to switch off the appliance, slide
the switch along the handle. Do the same to select the desired temper-
ature. To select the cool shot function, put the speed selector to the set-
ting 1 or 2 and keep the cool shot button * pressed.
WITH CONCENTRATOR NOZZLE:
The concentrator nozzle attaches
easily onto the barrel of your dryer and allows you to direct the airflow
on a small section of hair at a time as you style and shape hair with
a vent brush or comb. You can also build body and fullness into fine,
thin hair by directing the airflow against the natural growth of the hair.
WHILE USING:
Untwist cord from time to time to avoid tangling.
COOL SHOT FUNCTION:
Use this function to make your hair more flexi-
ble and shape it as you want. This function will strengthen the shape
you gave to your hair when styling it.
CLEANING AND CARE:
Unplug the appliance and let it cool down. Make
sure the air inlet and outlet grilles are free. To clean the grilles, use
a vacuum cleaner or a sharp object to unblock the wholes. Make sure
you do not insert the sharp object too far in the appliance, as it might
damage the appliance and even catch fire.
-7-
SW6112_SW6122_IM_201:Layout 1 2014-09-05 13:34 Page 7
