Optimum OPTIturn TU 3008 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 114

background image

OPTIMUM

M A S C H I N E N - G E R M A N Y

Version 1.0.1 dated 2015-05-27

Page 5

Original operating instructions

TU3008 | TU3008V

GB

Preface

Dear customer,

Thank you very much for purchasing a product made by OPTIMUM.

OPTIMUM metal working machines offer a maximum of quality, technically optimum solutions and convince
by an outstanding price performance ratio. Continuous enhancements and product innovations guarantee
state-of-the-art products and safety at any time.

Before commissioning the machine please thoroughly read these operating instructions and get familiar with
the machine. Please also make sure that all persons operating the machine have read and understood the
operating instructions beforehand.
Keep these operating instructions in a safe place nearby the machine.

Information

The operating instructions include indications for safety-relevant and proper installation, operation and main-
tenance of the machine. The continuous observance of all notes included in this manual guarantee the safety
of persons and of the machine.

The manual determines the intended use of the machine and includes all necessary information for its eco-
nomic operation as well as its long service life.

In the paragraph "Maintenance" all maintenance works and functional tests are described which the operator
must perform in regular intervals.

The illustration and information included in the present manual can possibly deviate from the current state of
construction of your machine. Being the manufacturer we are continuously seeking for improvements and
renewal of the products. Therefore, changes might be performed without prior notice. The illustrations of the
machine may be different from the illustrations in these instructions with regard to a few details. However,
this does not have any influence on the operability of the machine.
Therefore, no claims may be derived from the indications and descriptions. Changes and errors are reserved!

Your suggestion with regard to these operating instructions are an important contribution to optimising our
work which we offer to our customers. For any questions or suggestions for improvement, please do not hesi-
tate to contact our service department.

If you have any further questions after reading these operating instructions and you are not able to
solve your problem with a help of these operating instructions, please contact your specialised
dealer or directly the company OPTIMUM.

Optimum Maschinen Germany GmbH

Dr.- Robert - Pfleger - Str. 26

D-96103 Hallstadt

Mail:

[email protected]

Internet:

www.optimum-maschinen.com

«
...
3
4
5
6
7
...
»

Содержание OPTIturn TU 3008



















































































































Отзывы:

Нет отзывов

Похожие инструкции для OPTIturn TU 3008

Бренд: Roland Страницы: 50

Бренд: Jet Страницы: 2

Бренд: YANGZHOU SUPER MACHINE TOOL Страницы: 84

Бренд: Ercolina Страницы: 41

Бренд: NARGESA Страницы: 45

MASCOTE MS-1400E

Бренд: NARDINI Страницы: 77

Бренд: Snap-On Страницы: 20

Бренд: Woodstock Страницы: 52

Бренд: Triton Страницы: 12

Бренд: Tryax Страницы: 37

Бренд: Bolton Tools Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды