OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.1 dated 2015-05-27
Page 15
Original operating instructions
TU3008 | TU3008V
GB
1.10
Safety check
Check all safety devices
when starting any work,
once a week,
after all maintenance and repair work.
INFORMATION
Use the following summary to perform the checks.
1.11
Personal protective equipment
For certain work personal protective equipment is required.
Protect your face and your eyes: Always wear a safety helmet with face protection when per-
forming work where your face and eyes are exposed to hazards.
Use protective gloves when handling pieces with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
Use ear protection if the noise level (emission) in the workplace exceeds 80 dB (A).
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness. It must be
cleaned after each use and at least once a week.
General check
Equipment
Check
OK
Protective covers
Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Functional check
Equipment
Check
OK
EMERGENCY-STOP
mushroom switch
After activating the emergency stop mushroom button, the control voltage on
the lathe will shut off. The spindle continues to rotate for a while depending on
the mass moment of inertia of the spindle and workpiece.
Position switch
Lathe chuck protection
The spindle drive of the lathe must only be switch on if the lathe chuck protec-
tion is closed.
Interlock switch protec-
tive cover on the head-
stock
The spindle drive of the lathe must only be switch on if the protective cover of
the headstock is closed.
