Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
21 / 10 / 2008
Page 8
Safety Bench drill B16 H Vario ; Version 1.0.2
©
200
8
GB
The user must
Obligations
of the user
have followed a training on the operation of the bench drill,
know the function and performance,
before commissioning
-
have read and understood the operating manual,
-
be familiar with all safety devices and regulations.
Further
require-
ments to the
qualification
For working on the following machine parts, additional requirements are being applied:
Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, following measures are to be per-
formed in the following order.
disconnect all poles
secure against switching on
check dead circuit
1.6
Safety devices
Operate the bench drill only with properly functioning safety devices.
Stop the bench drill immediately if there is a failure in the safety device or if it is not functioning
for some reason.
It is your responsibility!
If the safety device has been activated or has failed, the bench drill must only be operated again
when
the cause of the failure has been removed,
you have made sure that there is no existing danger for persons or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the bench drill. The possible consequences are
the following
•
injuries due to components or parts of components flying off a high speed,
•
contact with rotating parts,
•
fatal electrocution,
The bench drill includes the following safety devices:
an EMERGENCY-STOP switch,
a drilling machine table with T-grooves to fasten the workpiece or a vice,
a protective cover for the pulleys with positioning switch.
