Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
21 / 10 / 2008
Page 12
Safety Bench drill B16 H Vario ; Version 1.0.2
©
200
8
GB
1.12
Safety during operation
In the description of work with and on the bench drill we highlight the dangers specific to that
work.
WARNING!
Before activating the bench drill, double check that this will
•
not endanger other people,
•
not cause damage to equipment.
Avoid unsafe working practice:
Make sure that your work does not endanger anyone.
The instructions of this manual must be observed strictly during assembly, operation, mainte-
nance and repair.
Do not work on the bench drill if your concentration is reduced, for example, because you are
taking medication.
Observe the regulations for the prevention of accidents issued by your association for the
prevention of accidents and safety in the workplace or other inspection authorities.
Inform the inspector of any danger or failure.
Stay at the machine until all rotating parts have come to a halt.
Use the prescribed personal protective equipment. Make sure to wear a well-fitting work suit
and a hairnet, if necessary.
Do not use protective gloves when drilling.
1.13
Safety during maintenance
Inform the operating staff on time of any repair and maintenance work.
Report all safety-relevant changes or performance details of the bench drill. Document all
changes, have the operating manual changed accordingly and train the machine operators.
1.13.1
Switching-off and securing the bench drill
Turn the bench drill off using the main switch and use a padlock to prevent the switch from being
turned on without authorisation or by accident.
All machine components and hazardous voltages are disconnected. Only the points marked with
this pictogram are not included.
