OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
21 / 10 / 2008
Page 27
Operation Bench drill B16 H Vario ; Version 1.0.2
©
2
008
GB
4.11
During the working process
The spindle sleeve feed is being performed by the star grip. Make sure that the feed is being at
a regular pace and not to fast.
The reset of the spindle sleeve is being performed by a track recoil spring.
WARNING!
Danger of clothing / or long hair getting caught.
•
Make sure to wear a well-fitting work suit during drilling work.
•
Do not use gloves.
•
If necessary, wear a hairnet.
CAUTION!
Danger of bumps by the levers on the star grip.
Do not release the star grip when repositioning the drilling spindle sleeve.
CAUTION!
Danger of crushing! Do not place your hand between the drill head and the spindle
sleeve.
INFORMATION
The smaller the bit, the more likely it is to break.
In the case of deep drilling, remove the bit from time to time to remove drilling chips from the
bore hole. A few drops of oil will reduce friction and prolong the service life of the bit.
