Operation
Version 1.4.3 - 2020-12-14
29
Translation of original instruction
BF16V
EN
BF16V_
G
B_
4.f
m
Loosen or unscrew the nut of the
guide screw.
Hold the drill-mill head. Loosen the
clamping screw. Turn the drill-mill
head head to the desired position.
Retighten the guide and clamping
screw.
Fig.4-4:
Clamping screw, guide screw
4.9
Offset the drill-mill head
The column of the drill-mill head may be
offset to the right or to the left.
Use the offsetting possibility if the drill-mill
head is swivelled to the left or to the right
for machining purposes.
Fig.4-5:
BF 16V
4.10
Clamping lever
The drilling-milling machine is equipped
with clamping levers and clamping
screws for the respective movement
axes.
ATTENTION!
Use the clamping levers for locking
the position of the axes during drilling
or milling operation.
Fig.4-6:
Clamping spots of the cross table
4.11
End stops
The cross table is fitted with two adju-
stable end stops.
Use the end stops for limiting the travel in
order to guarantee the exact repeatability
when manufacturing various identical-
components.
Fig.4-7:
End stops X axis
Clamping screw
Guide screw
Clamping
screws
Clamping screws
Clamping lever
End stops
