Safety
Version 1.4.3 - 2020-12-14
11
Translation of original instruction
BF16V
EN
BF16V_
G
B_
1.f
m
WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other staff working with the drilling-milling machine. The
possible consequences are
injuries due to components or parts of components flying off at high speed,
contact with rotating parts,
fatal electrocution.
The drilling-milling machine includes the following safety devices:
an EMERGENCY-STOP button,
a protective cover on the drilling / milling head.
a separating protective device on the milling spindle,
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
1.9.1
EMERGENCY-STOP button
The EMERGENCY STOP push button
switches off the drilling-milling machine.
Switching on the drilling-milling
Fig.1-1:
EMERGENCY-STOP button
ATTENTION!
The emergency stop push button stops the drilling-milling machine the moment it is
activated.
Press the EMERGENCY STOP push button only if there is a risk! If this push button is
actuated in order to switch off the drilling-milling machine in the standard operation the
tool or workpiece might get damaged.
After having actuated the EMERGENCY STOP, turn the knob of the particular push button to
the right in order to restart the machine.
1.9.2
Protective cover
The drilling / milling head is equipped
with a protective cover.
WARNING!
Only remove the protective cover
when the mains plug of the drilling-
milling machine is disconnected.
Fig.1-2:
Protective cover
Emergency stop
Protective cover
