
I.V. Pole cart
Installation and operating manual
OPTIKON 2000
Code 181004EN
2007-10-09 Rev. 0
7-1
7. TROUBLESHOOTING GUIDE
The TROUBLE-SHOOTING GUIDE lists some malfunctions which may occur, the
symptoms and the corrective actions.
If the system remains inoperative even after performing the corrective actions indicated
below, contact OPTIKON 2000 S.p.A. sales/service department.
SYMPTOMS
CORRECTIVE
ACTION
Mains power supply
System completely inoperative
a)
A.C. power cord not connected.
Connect power cord to the cart and the power
source.
b)
A.C. line fuse blown. Replace the line
fuses.
c)
Mains switch off. Check the position of
the mains switch locate on the rear of the cart
I.V.Pole
Pole does not move during
startuptest
Check the cable connecting the pole interface
to the console.
Pole stops at a wrong position
against an obstacle(i.e. low ceiling)
The electric I.V. pole features a torque
protection system. Remove the obstacle and
restore the proper bottle position .