OPTIKON I.V. Скачать руководство пользователя страница 18

I.V. Pole cart 

Installation and operating manual 

OPTIKON 2000 

6.3 INSTALLATION 

Remove the cart from its packing and follow the installation instructions. 
 

 

Fig. 2 

 

a.  Pick up the I.V. pole extension and manually screw it on the end of the I.V. 

pole. Insert the arm with the hook for holding the bottle on the end of the 
extension so that the hook is on the same side as the instrument's suction 
pump. Lock the arm into place by manually tightening the knob at the top of 
the extension. 

b.  Place the Optikon Console on the equipment tray. 
c.  Remove the protection cover from the electric sockets by unscrewing the 4 

socket-head screws. Removing the protection cover will give you access to 
the mains sockets (Fig. 2). Connect the control panel's power cable to one of 
the appropriate sockets (Fig. 1, no. 1) and pass it through the interspace on 
the right formed by the plastic support and the metal side of the cart. 
Connect the cable for controlling the electric I.V. pole to the interface 
connector for the I.V. POLE (Fig. 1, no. 2) and pass it through the interspace 
on the left formed by the plastic support and the metal side of the cart. 

Code 181004EN 

 

2007-10-09 Rev. 0 

 

6-2

Содержание I.V.






















Отзывы: